HOSMAC – S 3630 BS is a mineral oil-based, water-miscible cooling lubricant for machining steel, gray cast iron and aluminum alloys. Work operations such as drilling, turning and milling are safely mastered with the HOSMAC – S 3630 BS. In addition, HOSMAC – S 3630 BS is for grinding operations o.g. Suitable materials.
HOSMAC – S 3630 BS contains mineral oils, an active ingredient combination consisting of native fats and oils and significantly counteracts tool wear. Organic anti-corrosion additives protect machines, tools and workpieces from corrosion in the recommended concentrations. Anionic and nonionic emulsifiers result in translucent emulsions of high stability.
The workpieces manufactured with HOSMAC – S 3630 BS can be degreased in common alkaline cleaners (e.g. unitech – PURGON range). HOSMAC – S 3630 BS is used in concentrations of 4-8% diluted in water. This achieves a yield of up to 250 liters for the 10 liter container.
Mixing takes place by slowly pouring the concentrate into tap water while stirring thoroughly or with the help of automatic mixing devices. We sell the cooling lubricant HOSMAC – S 3630 BS in 1 and 10 liter containers.
HOSMAC – S 3630 BS fulfills the requirements and guidelines of TRGS 611.
Key data cooling lubricant HOSMAC – S 3630 BS
Appearance: yellow, low-viscosity liquid
Density (20 ° C): 1010 kg / m³
pH value (2 – 10%): 9.1 – 9.4
Factors for determining the concentration
Drilling oil test piston: 1.6
HOSMAC – S 3630 BS should not be exposed to large temperature fluctuations or frost during storage and should be brought to room temperature before use.
You can download the safety data sheet according to regulation (EG) No. 1907/2006 for the lubricant HOSMAC – S 3630 BS as PDF here: Safety data sheet HOSMAC – S 3630 BS